Job Summary

Reporting to the Piping Manager, he/she will be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities

• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• Prepare department procedures, manuals, guides, training materials and conduct training.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements

• Bachelor’s degree of BS Engineering course preferably Mechanical Engineering.
• Minimum 15 years and above in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, material specification and construction engineering support.
• Good knowledge of Caesar II.
• Interpretation of stress/vibration analysis report.
• Basic knowledge of AutoCAD.
• Basic knowledge of 3D model review through Naviswork or SPR.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication skills.

As a Principal Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor Degree of any four years BS Engineering course preferably Mechanical Engineering or at least fifteen (15) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of twelve (12) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, five (5) years of which in a supervisory capacity.

Skill Requirements:

• Good Knowledge of AutoCAD.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Role Description (Primary)

This is a full-time role for a Deputy Construction Department Manager. The Deputy Department Manager will work closely with the Construction Department Manager, Engineering Manager and other engineering disciplines to strengthen the construction team and participate in management reviews and other administrative activities as well as project specific activities such as construction planning and cost estimation, proposal preparation, and manhour planning in the bidding and tendering phase. The Deputy Department Manager will also oversee all administrative functions including department hiring, promotions, performance appraisals, overseas assignment, and organizational changes.

Role Description (Secondary)

Responsible for overseeing all construction activities with respect to schedule, performance, procedure, and making recommendations to Project Managers for improvements and corrective actions in the project execution phase. Additionally, the role entails the overseeing of the delivery and use of materials, tools, and equipment, and the quality of construction, staff productivity, and safety. The Deputy Department Manager will also be responsible for all sites’ HSSE Management and compliance with local government and clients’ HSSE regulations.

Duties and Responsibilities

• Construction planning.
• Construction cost estimation.
• Proposal preparation.
• Manpower planning, deployment, and control.
• Coordination for resolving construction issues and managing project schedule.
• Safety mind-set and the ability to develop RA and permit to work applications.
• Written and oral communication with site workers and subcontractors
• Preparation of construction execution plan/ policies.
• Monitoring of work schedule, progress, performance, etc.
• Approving changes in specifications or procedures.
• Preparing reports, handing over procedures / closing out procedures, etc.

Qualifications

• Bachelor’s degree in Mechanical/ Construction Management engineering.
• At least 15years of experience in the field of plant engineering design and construction experience in oil & gas, petrochemical, chemical and industrial plants.
• Supervisory Skills, Construction Safety, and Construction skills.
• Ability to independently manage construction work in an operational plant (refinery).
• Good knowledge and experience in construction planning and control throughout an entire EPC project lifecycle (bidding, execution, handover).
• Possess basic understanding of QOHSE requirements.
• Proficient in MS Office & AutoCAD.
• Excellent leadership skills with ability to lead a team of multinational disciplines.
• Good interpersonal, management and decision-making skills.
• Positive attitude and result oriented.

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare construction drawings such as Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Generate specification requisition for various process instruments, evaluate and select suitable instruments for required process control/monitoring application.
• Preparation of technical proposals (e.g. TBE) and cost estimation for tender projects.
• Preparation Vendor’s Document Review, BMBQ, Man-hour estimation and related.
• Engineering Support at site, attend Field Instrument & Control Inspection, FAT at vendor’s workshop and SAT & Loop Check at site.
• Perform other functions that may be assigned by superior.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 8 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare and review construction drawings such as Index, IO List, Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Evaluate and select suitable instruments for required process control/monitoring application.
• Lead the estimation work of BMBQ, Man-hour, technical proposal writeup, for new tender project.
• Preparation of project monthly report and attending project & client meeting as required.
• Work collaboration with other GEC and monitor daily job task assignment.
• Perform FAT/inspection for control system and field instruments as required.
• Perform SAT, Loop check, site construction and commissioning support as required.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 15 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

Duties & Responsibilities

Lead Engineer role independently for Mechanical scope such as:

• Perform all engineering design assignment (Core: Pumps, Compressors, Blowers, Turbines, Machinery, Package Equipment. Option: Vessels, HVAC )
• Checker role for department rotating/package deliverables.
• Prepare specifications, data sheet, and inquiry documents.
• Perform all discipline engineering assignment and design work.
• Perform technical bid evaluation.
• Mechanical Handling and Movement Study.
• Coordinate with disciplines for layout.
• Review of vendor documentation and vendor management.
• Provide technical requirements and assessment for inspection and QC related matters.
• Participate in site surveys, HAZOPs, and various workshops.
• Participate in FATs, shop inspections and provide technical support during construction, pre-commissioning stage.
• Handle interface matters and coordinate with relevant parties.
• He/she must be ready to work at construction site and be ready for working overseas upon request.
• Other work related requests from Department Manager/ Supervisor.

Competencies / Preferred Skills:

• Familiar with and have experience with pumps, compressors blowers, turbines and other industrial package.
• Possess ability to interpret client requirement, identify deviations and co-ordinate for resolutions. In addition, he/she demonstrates the ability to verify own product for error free output and draft technical resolutions for issues, communicate interface matters timely to various discipline.
• Experience to lead an amalgamated team of engineers working in different locations.
• Competent in English language and proficient in MS Office programs.
• Competent in planning and coordination with relevant parties both internal and external.

Education Qualifications & Other Requirements:

• Possess a Degree in Mechanical Engineering with 12~15 Years’ experience in the industry.
• Possess on-site experience for field engineering, commissioning and troubleshooting.
• Familiar with Shell DEPs, Exxon GPs, Chevron CES and GMPs design will be an added advantage.

Job Summary

 Responsible in providing general direction towards a successful completion of a project, ensuring the disciplines follow the quality standard set forth by the company. The job entails but not limited to identification of critical aspects of project execution and addresses them before they manifest as problems; verification and management of manhour consumption of different disciplines during the project execution.

Duties & Responsibilities

• Manage Project 3~20 million and above.
• Facilitate job interfacing with various disciplines, procurement and construction group.
• Conduct contract reviews, risk analysis and contingency plan.
• Organize proposal / project task force and staff allocation.
• Set project policy for quality, safety, cost and schedule.
• Initiate kick-off meeting with clients and internal disciplines.
• Prepare overall budget cost plan and analysis.
• Monitor and analyze project operation and schedule.
• Coordinate EPC cost estimation.
• Represent the company to client.
• Control project documents and design changes.
• Prepare project specifications and systems or processes for the execution of project.

Requirements:

• Bachelor’s degree in Mechanical Engineering, or Chemical Engineering preferred with at least 8 years of experience or equivalent.
• Have good knowledge of all disciplines, including Process Technical knowledge.
• Good Knowledge in Basic Design and P&ID.
• Knowledge of the fundamentals of project management, front-end engineering and relevant project planning and scheduling tools preferred.
• Solid track record in EPC Project Management in Oil & Gas and Petrochemical Industry.
• An effective team player with good communication and interpersonal skills, as well as strong presentation, technical, analytical and troubleshooting abilities.
• Self-motivated, with the ability to initiate plans and carry out all assignments professionally, diligently and expeditiously in accordance with established company procedures.
• Proven Leadership and Management skills.
• Proven interpersonal and relationship building skill.

Job Summary

Responsible in providing general direction towards a successful completion of a project, ensuring the disciplines follow the quality standard set forth by the company. The job entails but not limited to identification of critical aspects of project execution and addresses them before they manifest as problems; verification and management of man-hour consumption of different disciplines during the project execution.

Duties & Responsibilities

• Responsible for planning, scheduling, conducting and co-ordination of the technical aspects of projects.
• To regular contact with assigned project clients to convince client along project implementation.
• To participate in client meetings and resolves project issues.
• To ensure smooth and successful execution of projects that align with project strategies and objectives through the various phases (Feasibility studies, FEED, detailed design, construction, commissioning, start-up and handover of projects).
• To ensure that projects meet safety, cost, schedule and quality standards.

Requirements:

• Bachelor’s degree preferably in Mechanical Engineering or other Engineering disciplines with 3-5 years of experience.
• Have good knowledge of all disciplines, including Process Technical knowledge.
• Good Knowledge in Basic Design and P&ID.
• Knowledge of the fundamentals of project management, front-end engineering and relevant project planning and scheduling tools preferred.
• Solid track record in EPC Project Management in Oil & Gas and Petrochemical Industry.
• An effective team player with good communication and interpersonal skills, as well as strong presentation, technical, analytical and troubleshooting abilities.
• Self-motivated, with the ability to initiate plans and carry out all assignments professionally, diligently and expeditiously in accordance with established company procedures.
• Proven Leadership and Management skills.
• Proven interpersonal and relationship building skill.